Sigillante Acrilico in blister
Paintable Acrylic Sealant
Seals joints and cracks on porous surfaces. Casings, doors and windows, walls and stairs.
Available in: 60ml blister packs (12)
Seal casings, doors and windows, walls, stairs, pre-fabricated panels, fissures and cracks in masonry-work.
Not recommended for use in areas with foot traffic, on bituminous surfaces, on unpainted metallic surfaces and on joints immersed in water. Avoid freezing.
It is paintable, for use both inside and out.
The surfaces must be clean, dry and degreased. Prepare the surfaces to be treated and apply the masking tape (Saratoga Vernimask) to outline the edges (remove immediately after sealing).
Pierce the tube with the upper part of the cap. Cut the nozzle to the desired diameter and screw it onto the tube. Extrude the product with the provided key; within 10 minutes, smooth with a spatula moistened with water.
Hardening time: 1-2 weeks. Application temperature: +5°C/+40°C. The sealant must be protected from the rain or water in general for two hours after application in warm environments and for at least twenty-four hours in cold environments.
Clean: With water; once hardened, with a razor blade.
| Composition | Acrylic polymer base |
| Colour | White RAL 9003 |
| Consistency | Thixotropic |
| Pot life* | 10–15 minutes |
| Curing time | 1–2 weeks |
| Application temperature | +5/+40 °C |
| Operating temperature | -30/+80 °C |
| Movement tolerance | 12.5 % |
* at 23°C and 50% relative humidity
White paintable acrylic
|
Code: 85204001 |
EAN code 8005860852044 |
Contents: |
Package: |
