Fernovus® Alte Temperature spray

Do not apply in conditions of excessive humidity or at temperatures below +15°C.

It is applied as a single product in the protection of metal surfaces, both indoors and outdoors, and resists up to +650°C with peaks of up to +800°C.

Spray directly onto rusted surfaces. Surfaces must be clean and degreased, removing any flaking paint and loose, crumbly rust.
The canister temperature must be between +20°C and +25°C, with a maximum humidity of 60%. The surface to be painted must be at the same temperature to achieve optimal adhesion and a perfect finish.
Mask off any areas not to be treated. Shake the can vigorously upside down for one minute. Spray from a distance of 20-30 cm, using a slow, steady motion, holding the can upright and shaking occasionally. Apply in several light, crisscrossing strokes, leaving 3-5 minutes between each coat.

After applying the final coat, let the paint dry for at least two days.

On the third day, gradually raise the temperature to +250-300°C for at least half an hour. This process is necessary to permanently fix and stabilize the paint color.

Please note: The product will appear semi-gloss when applied; the actual color and finish will only be achieved after completing this process. With self-cleaning valve.

Paint removal: with acetone and/or nitro thinner.
Coverage per coat: 2 m² (5 m²/l).

a 20°C and 60% Relative Humidity