TOCCO Alte Temperature

Special high temperature resistant silicone enamel up to 800°C tips.
It dries to the touch in just 20 minutes.

Overpaintable (with other paint of the same type).

Thoroughly clean the surface to remove grease, dust, rust, water, etc.
Mask the area surrounding the part to be sprayed and sand the surfaces to be treated using #400 wet-or-dry sandpaper.
Ensure the surface is completely dry.
Shake the can vigorously for 1–2 minutes, turning it upside down occasionally. The can should be at a temperature between +20°C and +25°C; the application temperature should be between +10°C and +25°C (with a maximum air humidity of 60%).
Hold the can 20–30 cm away from the surface. Apply the product using slow, steady horizontal strokes, building up thin, overlapping coats with 3–5 minute intervals between each coat. To prevent runs or drips, it is best to apply several thin layers.
Avoid spraying in windy conditions that could stir up dust; do not apply over synthetic paints.
The can features a self-cleaning valve: once finished, clean the valve by turning the can upside down and pressing the nozzle until only gas—and no more paint—is released.
For specific high-temperature applications, allow the paint to dry for at least 2 days after the final coat. On the third day, gradually heat the object to a temperature of +250°C to +300°C for at least 30 minutes; this ensures the paint fully cross-links and sets permanently.
When first applied, the product will appear semi-gloss; the final color and finish are achieved only after the complete process is finished.

The paint can be removed using acetone and/or nitro-cellulose thinner.

Overpaintable (with other paint of the same type)