Happy Color® Stucco
Happy Color® Plaster
Covers small scratches, prepares surfaces for varnishing with any type of varnish.
Available in: Spray can (400 ml)
It adheres to any material, except non-stick ones, and can be used as turapores or ground hand on wood (it must not be worked or milled).
It is used on car bodies, heavy vehicles, boats, and generally on all painted or enameled surfaces.
It does not adhere to non-stick materials; it should not be worked or milled on wood.
The product is not indicated for scratches deeper than 0.8 mm or for extensive depressions.
Strong adhesion to any material, it can be used as turapori or ground hand on wood.
Paintable with every paint.
The product is sandable after approximately 24 hours.Strong adhesion to any material, it can be used as turapori or ground hand on wood.
Clean the surfaces thoroughly.
Mask off any areas that are not to be filled.
Shake the can for up to one minute after you hear the marbles rattling inside.
Spray from a distance of 30 cm.
For deep scratches, apply several coats, waiting approximately 30 minutes between each coat.
The product can be sanded after approximately 24 hours.
Not suitable for deep scratches deeper than 0.8 mm or for extensive dents.
Remove paint using acetone and/or nitro thinner. Can with self-cleaning valve.
| Aspetto | Bombola contenente liquido sotto pressione |
| Colore | Bianco |
| Densità a +20°C | Ca. 0.78 g/ml |
| Resa bombola* | 1,5-2 m² |
| Resistenza a temperatura | +100/ +120 °C |
| Fuori polvere | dopo 10 minuti |
| Asciutto al tatto | dopo 20 minuti |
| Asciutto in profondità | dopo 24 ore |
*A seconda della quantità di prodotto applicato
Spray Can
|
Code: 88172001 |
EAN code 8005860881723 |
Contents: 400 ml |
Package: 6 |
