50 Second Rapid Foam

Stable hold; once dry, it prevents deformation of the bonded surfaces.

VERSATILE: Fixes and seals.

VERSATILE: Paintable. Adheres to all building materials (except PE, PP, PTFE, and silicone); protects from ultraviolet rays.

RESISTANT to chemicals, solvents, microorganisms, and mold.

WATERPROOF

APPLICATION: Apply to clean, degreased, compact, smooth surfaces free of dust and loose particles. Substrates must be flat. Shake the can well before each use. Screw the adapter directly onto the valve nozzle. Optimal performance is achieved by keeping the can and surfaces between +18°C and +22°C. Wear gloves inserted into the can cap to avoid skin contact. Extrude the foam while holding the can upside down. The foam is self-expanding and expands once applied. Apply in a bead approximately 1-2 cm in diameter or in a nut shape, depending on the surfaces to be joined. Always maintain a distance of 4-5 cm from the edges so that the foam does not overflow when the substrates overlap. For large surfaces, apply several parallel bead shapes.

SPECIFIC DIRECTIONS FOR USE: Immediately join the surfaces by pressing the backing, then immediately separate the two surfaces. After 50 seconds, rejoin the backings by pressing firmly: initial adhesion is achieved within 50 seconds. Any repositioning and adjustments to the pieces must be done within the first 4-5 minutes by pressing firmly (to promote new adhesion).

CLEANING: Fresh foam can be cleaned with acetone; once hardened, remove with a razor blade.