Schiuma Mega
Quick foam matic
Fast-acting foam with high yield in terms of both volume developed and linear metres (up to 200 linear metres).
Available in: 870 ml can (12)
Its high filling power makes it ideal for attics, cavities, hollow spaces and all hard-to-reach applications.
High yield: over 70 litres in volume, over 200 linear metres in Ø 1 cm curb. Fast (curb can be cut after 6-8 minutes).
Application temperature: from +5°C to +35°C
Operating temperature: from -40°C to +100°C
Should be applied to clean, grease-free surfaces. Shake the can well before any use. Screw the can onto the neck of the gun.
Spray the surfaces with water before applying the foam. For the best performance the can should be ideally kept at a temperature between +18°C and +22°C.
Wear protective gloves inserted in the cylinder cap to avoid contact with skin. Humidify again during and after application. Regulate thickness by means of the screw-adjustable dispenser.
The foam is self-expanding and doubles in volume, therefore do not fill the cavity more than half-full. The can once begun must be used within about 4 weeks.
For intervals of time between one application and another of less than 2 weeks, it is recommended that you keep the can attached to the gun.
For longer intervals of time, unscrew the can and screw the Saratoga FOAM CLEANER foam-cleaning can onto the gun to clean it. Cleaning: Fresh foam can be cleaned with Saratoga FOAM CLEANER, using the special nozzle included; in its absence, clean with acetone. Once hardened, remove with a razor blade.
Cylinder
|
Code: 85238001 |
EAN code 8005860852389 |
Contents: 870 ml |
Package: 12 |
