LEGNO PROF Advance CERATO

Water-based wax impregnating agent for wood

Water-based impregnating agent for decorating and protecting wood, with special protective waxes added to increase its resistance to weathering and humidity.
uitable for both exterior and interior use; odourless.

Available in: Jar (750 ml) Colourless, Chestnut, Mahogany, Dark Walnut, Walnut, Teak, Oak - Pall Box Water-based wood impregnating agents (48)

Frequently asked questions

Ideal for all wooden elements: chalets, wooden houses, fixtures, doors, windows, balcony elements, pergolas, terraces, shutters, attics, stairs, fences, beams, panelling, furniture, various coverings, etc.

Not suitable for parquet and wooden floors.

It penetrates deeply without forming films, effectively protecting the wood from atmospheric agents. Enriched with pigments that guarantee good resistance to UV rays and greater colour stability even on items exposed to the sun.
It does not alter the natural appearance of the wood; on the contrary, it accentuates the grain, giving it a soft, natural, satin-waxy finish.
It allows the wood to breathe naturally, thus keeping it healthy over time.

On clean, dry woods free from oil, wax, grease, resin or old finishing. No need to dilute (ready-to-use); blend before use.
Apply by brush (following the wood grain), by roll, by spray (gun pressure 3-4 atm, nozzle Ø1.7-2mm) or by immersion.
Optimal results if applied with a brush. Always sand between one coat and another.

New wood
Sand, removing not adhering parts (resin, etc.); remove dust. Coats: 2 indoor; 2 or more outdoor.

Infested wood
Sand, clean, treat with proper curative, then apply the stain.

Untreated old wood
Sand, removing imperfections or old parts, remove dust. Apply 2 coats.

Treated woodS
Sand and remove dust; if necessary remove varnish. Apply 1-2 coats.

Oily wood (exotic woods, teak, ...)
Degrease with adequate diluent, then proceed with application (2 coats).

Application temperature +10/+40°C in dry climate. Do not apply if rains - after the rain, wait at least 24 hours before apply.
Tack free 1 hour, overcoat after 6 hours. More coats overlapped could darken the hues. Clean tools with water. Close tin after use.
As there is wax, the product cannot be over coated.

Application temperature (in dry weather) +10 / +30°C
Touch dry after 1 hour
Recoatable after 6-8 hours
Coats required 2 or more coats depending on requirements
Coverage approximate per coat* 18-20 m²/l

*Depends on the porosity of the substrate and the application method

Espositore

Code:

88574001

EAN code

Contents:

Package:

LegnoProfCerato barattolo Incolore

Code:

88581001

EAN code

8005860885813

Contents:

750 ml

Package:

6

LegnoProfCerato barattolo Rovere

Code:

88581007

EAN code

8005860917699

Contents:

750 ml

Package:

6

LegnoProfCerato barattolo Teak

Code:

88581002

EAN code

8005860916876

Contents:

750 ml

Package:

6

LegnoProfCerato barattolo Mogano

Code:

88581003

EAN code

8005860916883

Contents:

750 ml

Package:

6

LegnoProfCerato barattolo Castagno

Code:

88581004

EAN code

8005860916890

Contents:

750 ml

Package:

6

LegnoProfCerato barattolo Noce

Code:

88581005

EAN code

8005860916906

Contents:

750 ml

Package:

6

LegnoProfCerato barattolo Noce Scuro

Code:

88581006

EAN code

8005860916913

Contents:

750 ml

Package:

6

You might also like