Sverniciatore Super-Attivo
Super Active Paint Remover
Iron & Wood
It works deep down to quickly remove all types of paint, even the oldest and most stubborn, from wood, iron and non-ferrous metals.
Available in: Tin (750 ml) 400 ml can in a display box (400 ml)
Effective on primers, wood stains, rust inhibitors, synthetic paints, oil-based paints, nitrocellulose paints, acrylic paints, polyester paints, polyurethane paints, cold and oven-baked enamels, water-based paints, wall coatings, as well as on fillers, carpet adhesives, parquet adhesives and marine paints.
Do not apply to plastic surfaces.
It does not damage the surfaces to which it is applied in any way; furthermore, it does not cause wood to darken and delays the onset of rust on treated metal surfaces (please note: do not apply to plastic surfaces). Its gel formulation allows for vertical application without dripping, ensuring faster and more precise results.
On the surface where paint is to be removed, spread out with a brush a uniform coat of the product 2-3mm thick, bearing in mind that application on flat surfaces allows a faster and better result (do not apply to hot surfaces or surfaces exposed to direct sunlight). Wait from 3-5 minutes to 4 hours, depending on the type and layers of paint to remove (the product remains active until it dries, up to 24 hours). As a rough guide, 20-30 minutes are needed for synthetic paints and water-based coatings, 1-2 hours for solvent-based or water-based polyurethane paints, and 4 hours for polyester paints and stoving coating. Remove softened layers with a metallic spatula or scraper (on wooden surfaces it is advisable to use the spatula or scraper only in the direction of the veins of the wood). Rinse with lukewarm water and clean using a brush with hard bristles (natural or synthetic). Wait 24 hours before proceeding with the application of the new coating layer. Caution: Keep in a cool place.
Tin
|
Code: 54293001 |
EAN code 8005860542938 |
Contents: 750 ml |
Package: 6 |
