Adesivo per Polistirolo

Solvent-free and odourless

Paintable

Good initial adhesion and good repositionability (10-20 minutes)

Apply to clean, dry, degreased surfaces that are free of dust, oil and loose particles.
Surfaces must be absorbent to allow the water contained in the adhesive to evaporate.
Any cracks or holes in the surfaces must first be filled with a product such as Saratoga Stucco Leggero.

Apply to one of the parts as follows: 
On small and medium-sized elements, apply with a normal silicone gun in strips or dots (approximately 1 every 20 cm, over the entire surface to be bonded); on large elements (such as beadings or panels), apply zigzag or X-shaped beads, using a notched trowel if necessary to spread the product evenly.
Position the panels/elements to be bonded carefully, ensuring complete contact with the adhesive layer.
Join by applying uniform pressure. 
The parts can be repositioned within 10-20 minutes; complete hardening occurs after 24-48 hours.
Good initial grip, but for heavy materials it is advisable to support or clamp them for a few hours. Easy to clean with water from tools and surfaces; hardened adhesive can be cleaned with nitro thinner or a razor blade.

Keep out of reach of children. Safety data sheet available on request for professional users.

* at 23°C and 50% relative humidity