Forza Sigillante

Adhesive sealant sealing strength tape

High-build adhesive sealant tape that instantly seals cracks, crevices, cuts, breaks, and joints with a secure, permanent hold, even on uneven surfaces. This prevents costly damage caused by water infiltrations and leaks.

Available in: 38 mm x 1.5 m tape (10)    38 mm x 1.5 m tape in a Display Box (10 blister packs)    38 mm x 1.5 m tape in a Pall Box (30 blister packs)

Watch the video
Frequently asked questions

It can be applied to metals, glass, painted wood, and plastics (excluding non-stick materials such as Teflon®). When using on concrete and mortar, it is recommended to apply one or more coats of primer first. Do not use on crumbly or chalking surfaces, or on pipes under continuous pressure (e.g., gas). It also adheres to damp or dirty surfaces, although thorough cleaning is always recommended before application.

It is designed to solve even the most difficult sealing problems, both indoors and outdoors, where it can be applied in multiple layers. It is also resistant to atmospheric agents and pollutants, UV rays, humidity, and abrasion (it is not suitable for walking on, but can occasionally be walked on).

SEALING STRENGTH can be overpainted with water- or solvent-based paints, even though it is originally semi-transparent to provide a natural "masking" of the repair.

Do not use on crumbly or powdery surfaces, do not use on pipes under continuous pressure (e.g. gas).

Thanks to the combination of acrylic foams and a specially designed acrylic carrier, the tape offers high adhesion and flexibility to absorb vibrations and counteract thermal expansion, all without cracking or crumbling. the same composition allows for high conformability of the tape, facilitating its use and durability on profiles to which it is applied, whether riveted or fixed with screws or nuts.

Clean the surfaces to which FORZA SIGILLANTE will be applied.
Apply FORZA SIGILLANTE, taking care not to touch the adhesive with your fingers.
Press the applied tape with your fingers, especially along the edges and around irregularities (e.g., screws, nuts, rivets).
Remove the protective film.

Adhesive Acrylic
Composition Acrylic foam
Adhesive strength* 100 N/25 mm
Tensile strength* 37.5 N/25 mm
Temperature resistance* -20/+70°C
Application temperature  +15/+30°C
Elongation at break* 350%
Tape thickness  1 mm
UV resistance Excellent
Moisture resistance Excellent
Colour Transparent/Translucent

* Optimal performance levels achieved 24 hours after application, at 23°C

Blister

Code:

62478003

EAN code

8005860624788

Contents:

mm 38x1,50 m

Package:

10 blister

mm19x150cm Blister in Display Box

Code:

62478002

EAN code

Contents:

mm 38x1,50 m

Package:

10 blister

Tape mm 38x1,5 m in Pall Box

Code:

62478001

EAN code

Contents:

mm 38x1,50 m

Package:

30 blister