Bitumì Liquid Sheath

Liquid membrane

Liquid membrane, a single-component, rapid-setting finish based on synthetic rubber, ideal for waterproofing, protecting, and repairing.

Available in: Can (750 ml)

Frequently asked questions

Liquid Sheath is suitable for both interior and exterior applications. It is particularly suitable for waterproofing showers and bathrooms, joints between different sheaths, floors and walls, under-tiles in humid environments, cracks in roof transitions and penetrations, window frames, and skylight joints.

It is also ideal for repairing loose sheath edges, gutters, corrugated metal sheets, and for sealing air and water joints.

Suitable for: roofing, fiber cement sheets, low-traffic terraces, curved tiles, pipes, chimneys, flashings, overflows, and planters.

Ideal for all surfaces, it is particularly suitable for screed, concrete, bitumen, sheet metal, aluminum, steel, and wood. Also suitable for flat surfaces without slopes.

Completely impermeable to air and water, it is self-leveling and elastic, protects against corrosion and erosion, and is plasticizer-free, VOC-free, solvent-free, and odorless.

Ready to use, it is easily applied by brush, non-shrinking, and can be painted over. It covers and protects surfaces without damaging them.

Ensure the surfaces to be treated are clean, dry, and free of grease. Sand if necessary.

For application on highly porous surfaces, prime with Saratoga Mix1000 in a 1:1 ratio (1 part water to 1 part Mix1000).
Stir with a spatula before use until a uniform color is achieved.
Apply evenly with a brush (or roller), at least two coats of approximately 0.5 mm each, waiting approximately 1 hour (skin time) between coats.
Once completely dry (approximately 12 hours), ensure a total thickness of at least 1 mm has been applied.

  • Allow at least double the application times if applying in cold conditions.

Cleaning: Immediately with water; once hardened, remove with a razor blade.

Color

Black when dry
Application temperature 0°C/30°C
Temperature resistance -30°C/+80°C with peaks up to +100°C
Coverage One can is suitable for approximately 1 m2

You might also like